2012 Built Used CT Rigs

 

 

  

Description

This CT unit manufactured in 2012 is built upon a 2007 Kenworth t800b tandem/tri-Drive
tractor with a 127,038 km/ 8,184 engine hours. The unit features a fuller 18 speed
transmission with a driver controlled locking differential.

The unit comes complete with 560 CFM Hurricane compressor, 18t picker crane,
Sunstran hydraulic system, 400 l water tank, stainless steel methanol tank, 5k
methanol/soap tank, and 5k iron reel and stripping head. This unit is currently
equipped for 1 3/4” (44.45mm) tubing.

Injector is a 2007 Celtic model with 40,000 lb push/pull capacity able to handle
1.25/1.50/1.75 tubing.

Reel Capacity
1 ¼” (31.75 mm) – 4,200 meters
1 ½” (38.1 mm) – 3,500 meters
1 ¾” (44.45 mm) – 3,000 meters

 

Ingersoll-Rand DM25SP Rotary Blast hole Drill Rig

 

 

 

Description

 

1994 Ingersoll-Rand DM25SP Rotary Blast hole Drill Rig
Down The Hole (DTH) Single Pass
Meter Reads 8,754 Hours
A/C Rops
Powered by Cummins NTA 855C Diesel Engine @ 450 HP
IR HR2 850 cfm / 350 psi Air Compressor
750/300 Air Compressor
Dual pole battery isolators lockable
Ground level emergency stops
Heldweld safe access steps (retractable)
600mm cab access walkways etc.
MDG 15 compliances

Location : Australia

D34-MS Generators for Sale

 

 

 

Technical Data
Engine designation : D34A MS
No. of cylinders and configuration : V 12
Method of operation :
4-stroke,
direct-injected, turbocharged
diesel engine with aftercooler
Bore, mm : 150
Stroke, mm : 160
Displacement, l : 33.93
Compression ratio : 14.5:1

Underwater Pipeline Inspection Craft for Sale

 

 

 

 

 

General Characteristics
Occupants : 1 pilot and 1 passenger
Maximum operating depth :
100 metres / 330 feet up to
1,000 metres / 3,300 feet
Operational autonomy : upto 8 hours, optional up to 16 hours
Type : Dry, 1 atmosphere submersible
Classification : Germanischer Lloyd

Dimensions and Weight (Starting From)
Dimensions L x B x H : 431 cm x 323 cm x 207
Storage width : 244 cm (deflated tanks)
Weight (ex. passengers) : 3484 kg (salt water)
Maximum allowable payload : 250 kg (salt water)

 

 

 

 

 

 

 

 

2012 built Coiled Tubing unit for sale

 



Description
This CT unit manufactured in 2012 is built upon a 2007 Kenworth t800b tandem/tri-Drive
tractor with a 127,038 km/ 8,184 engine hours. The unit features a fuller 18 speed
transmission with a driver controlled locking differential.

 

 

Reel Capacity
1 ¼” (31.75 mm) – 4,200 meters
1 ½” (38.1 mm) – 3,500 meters
1 ¾” (44.45 mm) – 3,000 meters

Hurricane 1000# Air Booster Compressor for Sale

 

 

 

 

Model: 1000# Air Booster Compressor
Manufacturer: Hurricane
Year: 2004
Condition: Used

Description
2004 Hurricane 1000# Air Booster Compressor
8,071 Frame Hours (Air End Replace at 6,485 Hours on 3/4/2011)
CAT 3126 Diesel Engine
S/N-BEJ04791,
Electric Starter,
Radiator,
MURPHY Control Panel,
Heat Exchangers,
Scrubber Tank
New Paint Job Complete September 2013
Location : USA

Schramm T64HB Oil Drill Rig for Sale

 

 

 

Model: T64HB
Manufacturer: Schramm
Year: 1994
Condition: Used

Description

Schramm T64HB mounted on 1994 Ford LTL9000 with 3406 Cat.
Rig has less than 700 hours on rebuilt 8V92t engine.
450/250 Compressor with clutch
New upper chains.
Dual motor Gearbox was rebuilt last year.
3 1/2 API Regular pin on gearbox.
2 new hydraulic valves.
Compressor aftercooler rebuilt.
Set up for Petol breakout wrenches.