Failing 3000-CF Drilling Rig for sale

 

 

 

 

 

Model : 3000-CF Drill Rig
Manufacturer : Failing
Condition : Used

 

Rotary table :
Fully enclosed, oil bath type. Spiral bevel gears, ground & lapped
in matched sets.
Opening 18” through table for setting casing.
Hinges up to allow setting casing up to 34” O.D. Rotary table, drum & sand
reel, 5 forward & 1 reverse.
Air compressors : for control air….1 or 2 Wabco model 2 AVC mounted on compound case.
For developing wells, ect….model 253-S2 or 50 SDS or equivalent may be installed
on the gooseneck.

 

Engines :
Twin disc 11”; 2 plate. Air compressor….twin disc 11”; 3-plate.

 

Controls :
Located on side at left of drawworks. Air valve control panel;
Remote transmission shifter; throttle; trip & Kelly brakes; hydraulic control & pressure gauge;
instrument panel for engines; weight indicator & driller’s platform.

2000hp Gardner Denver 1500-E Drilling Rig for Hire 

Drawworks :
Gardner Denver 1500-E (2000 hp)
(2) EMD 79 traction motors (1000 hp each)
1 3/8" drill line, Eaton 336 auxillary brake

Power :
(3) Caterpillar 3512 engines w/ 1050 kw generators
SCR System :
Nov Ross Hill 1400 3 x 4 SCR house

Mast :
Pyramid 142' w/ 890,000 # capacity on 12 lines

Substructure :
Pyramid 30' box on box
KB 31' Rotary beam clearance 25'

Block Hook :
Skytop Brewster (500 ton) blockB. J. (550 ton) hook

Photos for this equipment will be shown on request

Driltech D40K Drill Rig For Sale

 

 

 

 

 

 

 

Description

 

2000 Driltech D40K drill rig
Sullair 1170 cfm / 350 psi air compressor
CAT 3456 disel deck engine
70000 lbs of pullback
Water injection pump
Hammer lubicator
Carousel
Mounted on a stering Truck
CAT C-12 diesel engine

Location : USA

2000HP Oilwell 2000-E Drilling Rig for Rent

 

 

Drawworks

Oilwell 2000-E (2000 hp)
(2) GE 752 traction motors (1000 hp each)
1 3/8" drill line, Eaton 436 auxillary brake

 

Power

(3) Caterpillar 3512 engines w/ 1204 kw generators

 

SCR System

Nov Ross Hill 1400 3 x 4 SCR house

 

BOP's

13 5/8" x 5,000 psi Shaffer annular
13 5/8" x 10,000 psi Shaffer double
13 5/8" x 10,000 psi Shaffer single

 

Auxillary Equipment

Pason EDR (base system)
Fuel tank - 20,727 gallon capacity
Water tank - (2) 483 barrel capacity each
Rig Manager and crew quarters
NOV IR-3080 iron roughneck
Satellite automatic driller
Kelly spinner
Bronco survey unit
Man rider
Power slips

Photos for this equipment will be shown on request

2012 Built Used CT Rigs

 

 

  

Description

This CT unit manufactured in 2012 is built upon a 2007 Kenworth t800b tandem/tri-Drive
tractor with a 127,038 km/ 8,184 engine hours. The unit features a fuller 18 speed
transmission with a driver controlled locking differential.

The unit comes complete with 560 CFM Hurricane compressor, 18t picker crane,
Sunstran hydraulic system, 400 l water tank, stainless steel methanol tank, 5k
methanol/soap tank, and 5k iron reel and stripping head. This unit is currently
equipped for 1 3/4” (44.45mm) tubing.

Injector is a 2007 Celtic model with 40,000 lb push/pull capacity able to handle
1.25/1.50/1.75 tubing.

Reel Capacity
1 ¼” (31.75 mm) – 4,200 meters
1 ½” (38.1 mm) – 3,500 meters
1 ¾” (44.45 mm) – 3,000 meters

 

Ingersoll-Rand DM25SP Rotary Blast hole Drill Rig

 

 

 

Description

 

1994 Ingersoll-Rand DM25SP Rotary Blast hole Drill Rig
Down The Hole (DTH) Single Pass
Meter Reads 8,754 Hours
A/C Rops
Powered by Cummins NTA 855C Diesel Engine @ 450 HP
IR HR2 850 cfm / 350 psi Air Compressor
750/300 Air Compressor
Dual pole battery isolators lockable
Ground level emergency stops
Heldweld safe access steps (retractable)
600mm cab access walkways etc.
MDG 15 compliances

Location : Australia

D34-MS Generators for Sale

 

 

 

Technical Data
Engine designation : D34A MS
No. of cylinders and configuration : V 12
Method of operation :
4-stroke,
direct-injected, turbocharged
diesel engine with aftercooler
Bore, mm : 150
Stroke, mm : 160
Displacement, l : 33.93
Compression ratio : 14.5:1