Coil tubing and Nitrogen Units for Sale

 

 

 

 Description

The injector (80K), and data acquisition SW from NOV.    The unit comes
with full 12 months warranty, training/Commissioning and 1 year

spare parts and tools

400hp Land Drilling Rig for Sale

 

Drawworks
Mac 400 with hydromatic (water) brake, catheads, powered by a Caterpillar 3408 rated
at 450 HP with air clutch and torque converter

 

Mast
P-J Services, 98’ free standing derrick, 280,000#, angle iron steel beams, scopes
with king pin and two axle dolly. Racking capacity of 8500’ of 4 ½” drill pipe

Substructure
One piece, I beam box type. 8’H x 15’W x 34’L with 4’ fold down wings, enclosed parts house and large volume tank with Quincy 350 air compressor driven by electric motor in substructure.

Rotary Table
Brewster 17 ½”, rotary bushing-square, 4 ½” square Kelly

Block/HookThree sheaves (6 lines) grooved for 1 1/8” line

LCI 2000 hp SCR Drilling Rig for Sale

Drawworks

(1) each LCI- 2000-Horse Power single drum Drawworks, drum size 27" x 50",
 Model-K braking system, Crown-O-Matic installed. Water circulated 54" x 10 3/8"
 brake rims Auxiliary brake One each model-336 water-disc braking for assist brake.
 Lebus wire line grooving 1-3/8". High and low drum for transmission for hoisting.
 Drawworks driven by 2 each model GE-752 DC traction motor. Driller control
 panel with -SCR electric control panel.

Refurbished Skytop Brewster Mounted Drilling Rig

 

 Drawworks
Reconditioned model H14610-38 Dwks - S/N 178, Clutch - Twin Disc
Model P0-230 and PO-234, Brakes - 46 X 10, New drum grooved for 1 1/8"
drill line(Includes 3000 Ft 1 1/8" 6x19 IWRC IPS drill line )
Sand Line Drum
Twin reconditioned twin disc model PO-224
Brakes 38 X 8  (Includes 15,000 Feet 9/16" new sandline)
Hydromatic Brake
New WWL V-80 Hydromatic water assist brake

Refurbished 14000 Drilling Depth Rig

 

 

Description
Depth : 14,000 feet
Drawworks : 725 IDECO – Twin 3406 Caterpillars (525 HP each) with two (2) 15,000 lbs. hoists
Ramp : Shop Built – 10’ high x 48’ long
Derrick :  Lee C. Moore 138’ – Gross Hook Load 427,583 #
Derrick Stand : Shop Built
Substructure : 425,000 # - Shop Built – 14’ high x 26’ wide x 56’ long
Bolsters : Derrick and Substructure
Block/Hook : Block // Hook Assy – 225 ton – 5 Sheave
Swivel – Top Drive : Electric 275 Ton CANRIG Top Drive SN 410 w/1050 KW
Generator & SCR House powered by 399 Caterpillar

Kato Generator for Sale

Specifications

3300KW, 4125KVA, 900RPM, 572.5 Amps, 

2400/4160V, 3 Phase, 60 Hz, 21,000Hrs. 

Kato Generator

Model-A240780000

Brewster N45 Rig Inventory

N45 Brewster Drawworks : Serial # 2C—TD 10-56, Total HP 900 Twin C-15
w/ 450 Torque Con.

Cat C-15 Drawworks Motors : 1. Serial # JRE01381 2. Serial #JRE01385
(with Motor Shed) Derrick : 105’ Butler Parks – 300,000# load, 11,000’ Board,
A-Frame 11’6” Substructure : (15’16”W x 43’W x11’H)

Blocks : 150 Ton McKissack w/BJ Unimatic Serial # 25

Swivel : King, Serial #15M-814 150 Ton

Mud Pumps : 1. Emsco DP 550 - Serial #118 2. Emsco DB 550 - Serial # 193

Mud Pits

1. Serial # 2002A, Cap +/- 250 bbl Size 6’ x 10’x 40’   

2. Serial # 2002B, Cap +/- 250 bbl Size 6’ x 10’x 40’

Spencer Harris 7000 Trailer Mounted Drilling Rig

Trailer Mounted Drilling Unit 

Spencer Harris 7000 Trailer Mounted Single Drum Drilling Rig, S/N 62, 1977 model f/11/8” Line, Catheads, Air Clutches, 15” Triple Auxiliary Water Brake, p/b (2) Caterpillar 3406 Diesel Engine w/Electric Starter S/N 90419138 and 9041913, Radiator, Twin Disc Torque Converter S/N 279679, 2 Engine Compound, Air Compressor.

Mast

Spencer Harris 97”H 250,000# Static Hook Load Tubular Mast, S/N N/A, Hydraulically Raised & Cable Scoped, a All Mounted on a 3 Axle Trailer, w/Hydraulic Utility Winch, Folding Walkways, w/Stairs, fuel, air, water & hydraulic Tanks,  Work Platform, 10.00R20 Tires, Weight Indicator, Torque Indicator.

Substructure

12’H X 14’W X 35’L Box Type Substructure 8’9” Under Rotary Beams, V Door Ramp, Stairs Safety Rails, 6’ H Back On Ramp.

Mud Pumps

(2) Continental Emsco F 650 triplex pumps, powered by Caterpillar 379 Diesel Engines, Skidded, Forge steel fluid ends w/treated caps, pulsation dampers, 2” shear relief valves, type D pressure gauge, V belts w/guards, serial # 4 and 20, engine block # 6L2533 and 3N6991 respectively.

Rebuilt Drilling Rig Mobile B61 for Sale

Model : B61 Drill Rig
Manufacturer : Mobile
Condition : Rebuilt

DescriptionMobile B61 Drill Rig
Aluminum 600 gallon water tank on board,
hydraulic Mobile drill chuck on the rotary head,
4 Cylinder Continental Diesel Deck Engine
FMC Beam 420 hydraulic driven water injection (mud) pump.