Kenworth T800B CTU for Sale

 

 

 

 Description

Manufacturer : Kenworth
Model : T800B
Year : 2001
GVW : 33,300 kg
Engine model : CAT C15
Horsepower : 475 Hp
Transmission : Eaton Fuller RTLO 18918B

3000 hp Mechanical Drilling Rig

 

 

 

 Drawworks

 Ideco H-3000 hp mechanically driven, with main drum grooved for 1 5/8” Drilling Line.
Drawworks is provided with Make-up/Spinning Cathead, Foster Type 37S-AK,
Breakout Catheads, Foster Type 24B-AK and Crown-O-Matic with emergency
activator switch on Driller’s Console.

Coil tubing and Nitrogen Units for Sale

 

 

 

 Description

The injector (80K), and data acquisition SW from NOV.    The unit comes
with full 12 months warranty, training/Commissioning and 1 year

spare parts and tools

400hp Land Drilling Rig for Sale

 

Drawworks
Mac 400 with hydromatic (water) brake, catheads, powered by a Caterpillar 3408 rated
at 450 HP with air clutch and torque converter

 

Mast
P-J Services, 98’ free standing derrick, 280,000#, angle iron steel beams, scopes
with king pin and two axle dolly. Racking capacity of 8500’ of 4 ½” drill pipe

Substructure
One piece, I beam box type. 8’H x 15’W x 34’L with 4’ fold down wings, enclosed parts house and large volume tank with Quincy 350 air compressor driven by electric motor in substructure.

Rotary Table
Brewster 17 ½”, rotary bushing-square, 4 ½” square Kelly

Block/HookThree sheaves (6 lines) grooved for 1 1/8” line

LCI 2000 hp SCR Drilling Rig for Sale

Drawworks

(1) each LCI- 2000-Horse Power single drum Drawworks, drum size 27" x 50",
 Model-K braking system, Crown-O-Matic installed. Water circulated 54" x 10 3/8"
 brake rims Auxiliary brake One each model-336 water-disc braking for assist brake.
 Lebus wire line grooving 1-3/8". High and low drum for transmission for hoisting.
 Drawworks driven by 2 each model GE-752 DC traction motor. Driller control
 panel with -SCR electric control panel.

Refurbished Skytop Brewster Mounted Drilling Rig

 

 Drawworks
Reconditioned model H14610-38 Dwks - S/N 178, Clutch - Twin Disc
Model P0-230 and PO-234, Brakes - 46 X 10, New drum grooved for 1 1/8"
drill line(Includes 3000 Ft 1 1/8" 6x19 IWRC IPS drill line )
Sand Line Drum
Twin reconditioned twin disc model PO-224
Brakes 38 X 8  (Includes 15,000 Feet 9/16" new sandline)
Hydromatic Brake
New WWL V-80 Hydromatic water assist brake

Refurbished 14000 Drilling Depth Rig

 

 

Description
Depth : 14,000 feet
Drawworks : 725 IDECO – Twin 3406 Caterpillars (525 HP each) with two (2) 15,000 lbs. hoists
Ramp : Shop Built – 10’ high x 48’ long
Derrick :  Lee C. Moore 138’ – Gross Hook Load 427,583 #
Derrick Stand : Shop Built
Substructure : 425,000 # - Shop Built – 14’ high x 26’ wide x 56’ long
Bolsters : Derrick and Substructure
Block/Hook : Block // Hook Assy – 225 ton – 5 Sheave
Swivel – Top Drive : Electric 275 Ton CANRIG Top Drive SN 410 w/1050 KW
Generator & SCR House powered by 399 Caterpillar

Kato Generator for Sale

Specifications

3300KW, 4125KVA, 900RPM, 572.5 Amps, 

2400/4160V, 3 Phase, 60 Hz, 21,000Hrs. 

Kato Generator

Model-A240780000

Brewster N45 Rig Inventory

N45 Brewster Drawworks : Serial # 2C—TD 10-56, Total HP 900 Twin C-15
w/ 450 Torque Con.

Cat C-15 Drawworks Motors : 1. Serial # JRE01381 2. Serial #JRE01385
(with Motor Shed) Derrick : 105’ Butler Parks – 300,000# load, 11,000’ Board,
A-Frame 11’6” Substructure : (15’16”W x 43’W x11’H)

Blocks : 150 Ton McKissack w/BJ Unimatic Serial # 25

Swivel : King, Serial #15M-814 150 Ton

Mud Pumps : 1. Emsco DP 550 - Serial #118 2. Emsco DB 550 - Serial # 193

Mud Pits

1. Serial # 2002A, Cap +/- 250 bbl Size 6’ x 10’x 40’   

2. Serial # 2002B, Cap +/- 250 bbl Size 6’ x 10’x 40’

Spencer Harris 7000 Trailer Mounted Drilling Rig

Trailer Mounted Drilling Unit 

Spencer Harris 7000 Trailer Mounted Single Drum Drilling Rig, S/N 62, 1977 model f/11/8” Line, Catheads, Air Clutches, 15” Triple Auxiliary Water Brake, p/b (2) Caterpillar 3406 Diesel Engine w/Electric Starter S/N 90419138 and 9041913, Radiator, Twin Disc Torque Converter S/N 279679, 2 Engine Compound, Air Compressor.

Mast

Spencer Harris 97”H 250,000# Static Hook Load Tubular Mast, S/N N/A, Hydraulically Raised & Cable Scoped, a All Mounted on a 3 Axle Trailer, w/Hydraulic Utility Winch, Folding Walkways, w/Stairs, fuel, air, water & hydraulic Tanks,  Work Platform, 10.00R20 Tires, Weight Indicator, Torque Indicator.

Substructure

12’H X 14’W X 35’L Box Type Substructure 8’9” Under Rotary Beams, V Door Ramp, Stairs Safety Rails, 6’ H Back On Ramp.

Mud Pumps

(2) Continental Emsco F 650 triplex pumps, powered by Caterpillar 379 Diesel Engines, Skidded, Forge steel fluid ends w/treated caps, pulsation dampers, 2” shear relief valves, type D pressure gauge, V belts w/guards, serial # 4 and 20, engine block # 6L2533 and 3N6991 respectively.

Rebuilt Drilling Rig Mobile B61 for Sale

Model : B61 Drill Rig
Manufacturer : Mobile
Condition : Rebuilt

DescriptionMobile B61 Drill Rig
Aluminum 600 gallon water tank on board,
hydraulic Mobile drill chuck on the rotary head,
4 Cylinder Continental Diesel Deck Engine
FMC Beam 420 hydraulic driven water injection (mud) pump.

Rebuilt Drilling Rig Mobile B61 for Sale

 

 

 

 

 

Model : B61 Drill Rig
Manufacturer : Mobile
Condition : Rebuilt

 

Description

 

Mobile B61 Drill Rig
Aluminum 600 gallon water tank on board,
hydraulic Mobile drill chuck on the rotary head,
4 Cylinder Continental Diesel Deck Engine

Coiled Tubing Unit For Sale

2013 Built CTU for Sale

Failing 3000-CF Drilling Rig for sale

 

 

 

 

 

Model : 3000-CF Drill Rig
Manufacturer : Failing
Condition : Used

 

Rotary table :
Fully enclosed, oil bath type. Spiral bevel gears, ground & lapped
in matched sets.
Opening 18” through table for setting casing.
Hinges up to allow setting casing up to 34” O.D. Rotary table, drum & sand
reel, 5 forward & 1 reverse.
Air compressors : for control air….1 or 2 Wabco model 2 AVC mounted on compound case.
For developing wells, ect….model 253-S2 or 50 SDS or equivalent may be installed
on the gooseneck.

 

Engines :
Twin disc 11”; 2 plate. Air compressor….twin disc 11”; 3-plate.

 

Controls :
Located on side at left of drawworks. Air valve control panel;
Remote transmission shifter; throttle; trip & Kelly brakes; hydraulic control & pressure gauge;
instrument panel for engines; weight indicator & driller’s platform.

2000hp Gardner Denver 1500-E Drilling Rig for Hire 

Drawworks :
Gardner Denver 1500-E (2000 hp)
(2) EMD 79 traction motors (1000 hp each)
1 3/8" drill line, Eaton 336 auxillary brake

Power :
(3) Caterpillar 3512 engines w/ 1050 kw generators
SCR System :
Nov Ross Hill 1400 3 x 4 SCR house

Mast :
Pyramid 142' w/ 890,000 # capacity on 12 lines

Substructure :
Pyramid 30' box on box
KB 31' Rotary beam clearance 25'

Block Hook :
Skytop Brewster (500 ton) blockB. J. (550 ton) hook

Photos for this equipment will be shown on request

Driltech D40K Drill Rig For Sale

 

 

 

 

 

 

 

Description

 

2000 Driltech D40K drill rig
Sullair 1170 cfm / 350 psi air compressor
CAT 3456 disel deck engine
70000 lbs of pullback
Water injection pump
Hammer lubicator
Carousel
Mounted on a stering Truck
CAT C-12 diesel engine

Location : USA

2000HP Oilwell 2000-E Drilling Rig for Rent

 

 

Drawworks

Oilwell 2000-E (2000 hp)
(2) GE 752 traction motors (1000 hp each)
1 3/8" drill line, Eaton 436 auxillary brake

 

Power

(3) Caterpillar 3512 engines w/ 1204 kw generators

 

SCR System

Nov Ross Hill 1400 3 x 4 SCR house

 

BOP's

13 5/8" x 5,000 psi Shaffer annular
13 5/8" x 10,000 psi Shaffer double
13 5/8" x 10,000 psi Shaffer single

 

Auxillary Equipment

Pason EDR (base system)
Fuel tank - 20,727 gallon capacity
Water tank - (2) 483 barrel capacity each
Rig Manager and crew quarters
NOV IR-3080 iron roughneck
Satellite automatic driller
Kelly spinner
Bronco survey unit
Man rider
Power slips

Photos for this equipment will be shown on request

2012 Built Used CT Rigs

 

 

  

Description

This CT unit manufactured in 2012 is built upon a 2007 Kenworth t800b tandem/tri-Drive
tractor with a 127,038 km/ 8,184 engine hours. The unit features a fuller 18 speed
transmission with a driver controlled locking differential.

The unit comes complete with 560 CFM Hurricane compressor, 18t picker crane,
Sunstran hydraulic system, 400 l water tank, stainless steel methanol tank, 5k
methanol/soap tank, and 5k iron reel and stripping head. This unit is currently
equipped for 1 3/4” (44.45mm) tubing.

Injector is a 2007 Celtic model with 40,000 lb push/pull capacity able to handle
1.25/1.50/1.75 tubing.

Reel Capacity
1 ¼” (31.75 mm) – 4,200 meters
1 ½” (38.1 mm) – 3,500 meters
1 ¾” (44.45 mm) – 3,000 meters

 

Ingersoll-Rand DM25SP Rotary Blast hole Drill Rig

 

 

 

Description

 

1994 Ingersoll-Rand DM25SP Rotary Blast hole Drill Rig
Down The Hole (DTH) Single Pass
Meter Reads 8,754 Hours
A/C Rops
Powered by Cummins NTA 855C Diesel Engine @ 450 HP
IR HR2 850 cfm / 350 psi Air Compressor
750/300 Air Compressor
Dual pole battery isolators lockable
Ground level emergency stops
Heldweld safe access steps (retractable)
600mm cab access walkways etc.
MDG 15 compliances

Location : Australia

D34-MS Generators for Sale

 

 

 

Technical Data
Engine designation : D34A MS
No. of cylinders and configuration : V 12
Method of operation :
4-stroke,
direct-injected, turbocharged
diesel engine with aftercooler
Bore, mm : 150
Stroke, mm : 160
Displacement, l : 33.93
Compression ratio : 14.5:1